Lets Whatsapp

Scorpion ADX-1 BattleFlage Helmet

20,999.00

Clear

Description

Note: Ships in 2-3 working days after placing the order.

Note: This helmet comes with a clear visor!

A Swiss army knife of the helmet world

Introducing the all new ADX-1, a versatile modular Adventure Touring helmet. It has features and quality that you would expect to pay three times more for. The ADX-1 can be used as a full face ADV helmet with external peak visor attached, or the peak visor can be removed and you have an aerodynamic touring helmet. Our oversized eye port is extremely wide for greater peripheral vision and downward visibility.

Description:

Features

  • Shell in thermoplastic resin: silent and aerodynamic conception for a comfort tested in air tunnel.
  • Chinbar reinforced with EPS for a top front protection.
  • System of ventilation: 3 indexed air-intakes adjustable independently (1 at the level of the chin, 1 on the top, 1 on the back), create a depression and optimize the airflow through the helmet.
  • Nose guard: improves the performances of the anti-fog coating of the shield.
  • Chin strap buckle with micrometric setting for a perfect and reliable adjustment in the time.
  • Dismountable visor to switch to a perfect offroad use.
  • ECE 22-05

Pinlock® Maxvision

Fitting perfectly into the specially depressed area of the faceshield, the Pinlock® creates continuous air pressure through the compression force, which in turn stops condensation – and thus fogging – from occurring even when the temperature difference between the outside and the inside of the helmet increases.

Kwikwick2® Liner

Very effective, hypoallergenic, removable, machine washable, and very soft and pleasant to the touch, the KwikWick2® lining of the new ScorpionExo® 2011 range is a real custom-made slipper for your head.

SpeedView™

The retractable sunvisor (approved UV400 and anti-fog coating EverClear ™) is protecting immediately the eyes by offering higher protection without changing Face Shield.

 

How to choose the good size ?

The first step in the fitting process is to measure around your head at the temple above the eye brow. These are guidelines, a starting point, visit your dealer for assistance in selecting a proper fit.

Sizes

XS 54-55cm
S 55-56cm
M 57-58cm
L 58-59cm
XL 60-61cm
XXL 62-63cm

The next step in the fitment process are fitment checks. The following tests should be performed with the chin strap properly and securely in place. Helmet movement should also move the skin on your face and scalp. Helmets will fit snug when new and have a break in period. The helmet should not fit so tight as to cause discomfort or pain. If your measurement is at the upper number of any size range start at that range then move up as needed.

How your helmet fits perfectly

1. With the helmet in place and chin strap secured, shake your head side to side, if the helmet moves independently of your head then the helmet is too big. When performing this test, the helmet liner and cheek pads should be in direct contact with your skin. While shaking, your skin should move with the helmet.

How your helmet fits perfectly

2. Place one hand directly behind your head and push forward. Use your other hand and try to slip your little finger between your forehead and the helmet EPS liner. If you are able to slip your finger in, the helmet is too big.

How your helmet fits perfectly

3. To test for helmet lift, place one hand on the chin bar and push up (while the chin strap is secured), if the helmet comes off your head it is too big. Next, place one hand on the back and push up again, if your helmet lifts off your head the helmet is too big.

WARRANTY: Great quality comes a long with a good warranty

All Scorpion helmets are warranted against defects in materials and workmanship for 05 YEARS from original purchase, and this warranty is limited to the repair and replacement of parts and the necessary labor and services required to repair the helmet.

All claims should be accompanied with original invoice.

Normal wear and tear is not covered by this warranty. Modification of any kind made to the helmet by the user or any third party will render this warranty null and void. This includes but is not limited to the installation of audio systems, drilling the shell or liner, carving or compressing the liner and painting of the shell.

Normal wear and tear to the finished and painted surfaces, abnormal treatment or abuse to the helmet interior is NOT covered under this warranty.

This warranty also does NOT cover chips, scratches, abrasions or other damage to the helmet’s outer shell and painted surfaces caused by contact of the helmet with another surface or object.

 

Additional information

Size

, , , , ,

Reviews

There are no reviews yet.

Be the first to review “Scorpion ADX-1 BattleFlage Helmet”

Your email address will not be published. Required fields are marked *



latest Products

Special category of products