Description

Crank1 CB12A-BS Shipping in 3-5 working days after placing the order

Note: Shipping by Surface method only

Crank1 CB12A-BS Specifications:

Capacity: 12volt
Amperes: 10.5Ah(10HR)
Dimensions:-
Lenth × width × Hight
150mm×86mm×108mm
Weight: 3.320kg
CCA: 185

Compatibility:

Compatible with YT12A-BS(SMF)

Description:

Crank1 CB12A-BS- AGM or Absorbent Glass Mat is an advanced lead-acid battery that provides superior power to support the higher electrical demands of today’s vehicles and start-stop applications.

AGM batteries are extremely resistant to vibration, are totally sealed, non-spillable and maintenance-free. AGM offers better cycling performance, minimal gassing, and acid leakage when compared with conventional lead-acid batteries.

High-Performance AGM (Absorbed Glass Mat) Battery Features- Crank1 CB12A-BS

Highest CCA (Cold Cranking Amps)
Heavy-duty terminals, with built-in copper nuts for multiple connections
Premium absorbed glass mat (AGM) technology
Sealed, non-spillable design
Meets or exceeds Powersports OEM specification
Maintenance Free – NEVER add water, but periodic charging required when not in use
Engineered to protect against corrosion, withstand vibration, and deliver high cranking power
Polypropylene cover and container – superior resistance in extreme conditions of cold and heat, more flexible than ABS material
12 months warranty

Installation and Maintenance- Crank1 CB12A-BS:

Always connect the positive terminal firstly.
DO NOT reverse polarity otherwise the electrical equipment of the motorcycle will damage.
Caution:
*Some can’t be activated due to the different performance of different vehicles. Start the engine for more times or step on gas which can more easily to activate.
*Manual activation is recommended to achieve the exact date recorded.
During acid filling, wearing acid-proof cloths, rubber boots, shield glass and rubber gloves etc.
If the skin and clothes are splashed by acid, wash with a large quantity of water. Seek medical help if necessary.
DO NOT over-discharging the battery Crank1 CB12A-BS, charging the battery timely after discharging.
Dismount or disconnect the negative terminal of the battery if the motorcycle hasn’t been in service for the long term.
DO NOT check the battery Crank1 CB12A-BS has power or not by short-circuit the terminal.
Regularly check the terminal connection and the surface of the terminal is clean or not to ensure well connection.
Storage the battery where is 5~25℃, dry, ventilated, and no direct sunshine. Keep the battery at least 2m away from the heat source. Regularly check and maintain the battery.

Safe Use Precautions:

The inside electrolyte will corrode metal, cotton product, stone. Use properly.
Do not place the battery against the side or upside down to prevent acid leakage.
The hydrogen will be generated during the working and discharging of the battery which will cause an explosion if there were a fire. Pay attention to the following:
1. Maintain and use the battery where is ventilate.
2. No sparks and flame when the battery is in maintenance.
3. If the battery is charging outside the vehicle which can’t be installed immediately after finish charging until laying at least 10min to release the hydrogen generated inside the battery.
4. After riding, the battery can’t be dismounted immediately until laying for at least 10 mins.
5. During charging, the ambient temperature should not be over 45℃, Otherwise cooling by water or by reducing the charging current and charging volts.
DO NOT place the metal tool or conducting matter nearby the terminal in case short-circuit the terminal.
DO not knock the terminal by hammer during the battery installation.
DO NOT place the metal tool or conducting matter nearby the terminal in case short-circuit the terminal.
DO not knock the terminal by hammer during the battery installation.
Be safe during carrying to prevent hitting.

Be safe during carrying to prevent hitting——->

This is a typical saying among bike aficionados. On the off chance that you are additionally one and love your machine, you ought to consistently be keeping watch for tips to take great consideration of it. Alongside keeping all reports like enrollment declaration, driving permit, and TWO WHEELER INSURANCE dynamic and refreshed, you ought to get your bicycle overhauled at ordinary stretches. Essentially, taking great consideration of the battery is additionally significant.